Custom UV DTF Printing
Your artwork, professionally printed in-house in Lowestoft.
Upload your finished design and we’ll produce a vibrant UV DTF transfer ready to apply to glass, acrylic, plastic, metal, ceramic and other smooth hard surfaces. No heat press or weeding is required.
This is a print-only service. Cups, blanks and design work are not included unless stated.
How custom UV DTF printing works
1. Prepare your artwork
Create your gang sheet using a transparent PNG at 300 DPI and supply it at the exact finished size required.
2. Choose your sheet and upload
Select the sheet size, upload the ready-to-print file and complete your order online.
3. We print and dispatch
We check the file for obvious print issues, print it in-house and dispatch it from the UK as quickly as possible.
Artwork requirements
- Transparent PNG file
- 300 DPI recommended
- Artwork supplied at the correct finished size
- No screenshots, white backgrounds or low-resolution files
- Fonts and fine details must be clear at print size
Important: unsuitable artwork may delay the order. Artwork corrections and design work are not included; contact us before ordering if you need help.
Where can UV DTF be used?
UV DTF works best on clean, dry, smooth hard surfaces:
- Glass cans and tumblers
- Acrylic and plastic blanks
- Metal and ceramic items
- Coated wood and selected hard surfaces
Always test an unfamiliar surface first. UV DTF is not suitable for fabric or flexible materials.
Applying your UV DTF transfer
- Clean the surface with isopropyl alcohol and allow it to dry.
- Rub or squeegee the transfer firmly before removing the backing.
- Position carefully—the transfer cannot be repositioned once applied.
- Press firmly across the design and remove any air bubbles.
- Slowly peel away the clear carrier film.
- Allow at least 48 hours before use.
Care: hand wash only. Do not soak or place the finished item in a dishwasher.